ÖĐÎÄ°ćWater Pump
-
ISW horizontal inline pump
ISW series inline close coupled pump are designed according to ISO2858 & JB/T53058-93 standard. It is used to transfer clean water, and other liquids that physical properties which are similar to those of pure-water, applicate in industrial and city water supply and drainage, high buildings booster water supply, garden irrigation, fire-fighting booster, remote water supply, heating systems, circulating booster of cold & hot water in bath rooms. The pumped liquid should be below 80ˇć.
Details -
ISWR high temperature Medicators
ISWR high temperature Medicators is a single-stage single-suction cantilever Medicators, suitable for heating, hot water, air conditioning systems in various buildings and industries such as metallurgy, rubber, printing and dyeing, and sugar making department. It is used to transport the medium whose temperature does not exceed 120ˇć and whose inlet pressure does not exceed 0.8MPa.
Details -
ISWB explosion proof oil Medicators
ISWB explosion proof oil Medicators is specially designed to transport petroleum products, such as gasoline, kerosene, diesel and other petroleum products, and the temperature of the medium being transported is -20ˇć ~ +120ˇć. The standard is ISO2858 & JB/T53058-93.
Details -
ISWH SS non clog Medicators
ISWH SS non clog Medicators is used for conveying liquids without solid particles, corrosive, and viscosity similar to water. It is suitable for petroleum, chemical, metallurgy, electric power, papermaking, food, pharmaceutical and synthetic fiber sectors. The operating temperature is - 20ˇćˇ«+105ˇć.
Details -
ISG vertical inline Medicators
ISG series inline close coupled pump are designed according to ISO2858 & JB/T53058-93 standard. It is used to transfer clean water, and other liquids that physical properties which are similar to those of pure-water, applicate in industrial and city water supply and drainage, high buildings booster water supply, garden irrigation, fire-fighting booster, remote water supply, heating systems, circulating booster of cold & hot water in bath rooms. The pumped liquid should be below 80ˇć. Note: we also supply hot water pump, high temperature pump, chemical pump, oil pump with special design.
Details -
IRG,SGR hot water inline vertical Medicators
IRG/SGR series vertical hot water pipeline pump produced by Yangtze, the pipeline pump implements the standard JB/T6878-2006, this series of products is a novel electric pump developed for pipeline pressurized transportation and to solve the problem of low pipeline pressure Pump.
Details -
IHGB/ISGB/TD marine vertical sea water Medicators
IHGB marine vertical sea water MedicatorsŁ¬ also as known as stainless steel corrosion-resistant inline pump,pipeline pump, booster pump. The pump structure is designed accordance with the international standard ISO2858 . The flow range is 1.1~1345m3/h, the lift range is 2.8~150m
Details -
GW sewage dredge inline pump
GW sewage dredge inline pump adopts unique impeller structure and new mechanical seal, which can effectively transfer liquid with solid particles and long fibers. Compared with the traditional impeller, the impeller of the pump adopts the form of single flow channel or double flow channel. With a reasonable volute chamber, the pump has high efficiencyŁ¬and no vibration during operation.
Details -
GDL multistage centrifugal inline pump
GDL multistage centrifugal inline pump are designed according to ISO2858 & JB/T53058-93 standard. It is used to transfer clean water, and other liquids that physical properties which are similar to those of pure-water, applicate in industrial and city water supply and drainage, high buildings booster water supply, garden irrigation, fire-fighting booster, remote water supply, heating systems, circulating booster of cold & hot water in bath rooms.
Details -
YG explosion proof oil inline Medicators
YG explosion proof oil inline Medicators is designed by Yangtze R&D team , used the performance parameters of IS Medicators, combined design on the basis of ordinary vertical pumps. hot water, high temperature, corrosive chemical pumps, and oil pumps. This series of products has the advantages of high efficiency and energy saving, low noise and reliable performance, and meets the requirements of the new National Ministry of Machinery JB/T53058-93.
Details -
IS single end suction Medicator Master Pro 0,2-2%
IS single end suction water pump is based on standard ISO2858. It is good choice as an energy-saving axial intake Medicators. IS pump have wide versatility because the shafts, bearings and shaft seals of the same specification can be interchanged. The advantages of this single-stage single-suction Medicators are: the whole series of hydraulic performance has a reasonable layout, a wide range of user choices, and convenient maintenance; the efficiency and suction lift reach the international average advanced level.
Details -
IR high temperature overhung Medicators
IR high temperature overhung Medicators is with similar structure with IS type end suction pump. The only difference point IR shaft seal way. IR type pump normally install with mechanical seal way to transfer the liquid temperature lower than 104ˇć.
Details -
RY thermal oil Medicatorss
RY series thermal oil Medicators is developed by absorbing the characteristics of various advanced technology. It can be widely used in petroleum, grease, boilers, construction, road maintenance, pharmaceuticals, plastics, It is an ideal heat carrier medium circulating pump in the industrial fields of rubber, fiber-containing textile, printing and dyeing, and the operating temperature is less than or equal to 370ˇć.
Details -
XS/YPS double suction centrifugal water pump for irrigation
S-type single-stage double suction centrifugal water pump for irrigation has the characteristics of long life, high efficiency, reasonable structure, low operating cost, convenient installation and maintenance, etc. It is an ideal for irrigation, fire protection, air conditioning, chemical industry, water treatment and other industries.The design pressure of the pump body is 1.6MPa and 2.0MPa.
Details -
XSL vertical split case pump
XSL type vertical split case pump is with vertical installation, the suction port and discharge port are in the horizontal direction, the separation surface of the Medicators body and the middle-opening pump cover is vertically separated on the axis center line, and it is not necessary to disassemble the water inlet, outlet return pipeline and motor during maintenance.
Details -
CDL/CDLF vertical multistage centrifugal boosting pump
CDL/CDLF vertical multistage centrifugal boosting pump, which are multi-functional products. They can be used to convey various mediums from tap water to industrial liquid at different temperature and with different flow rate and pressure. CDL type is applicable to conveying non-corrosive liquid, while CDLF is suitable for slightly corrosive liquid.
Details -
TSWA high pressure sea water multistage pump
TSWA type high pressure sea water multistage pump is a series of horizontal, single-suction multi-stage and segmented structures, which are newly developed and produced energy-saving products. It has significant advantages such as high efficiency, low operating noise, good anti-cavitation performance, reasonable structure and long service life due to the excellent hydraulic model and low-speed motor.
Details -
DL centrifugal vertical multistage pump
DL and DLR pumps are vertical single-suction multi-stage segmented Medicatorss, which are used to transport clean water without solid particles and liquids with physical and chemical properties similar to water. It is mainly used for water supply of high-rise buildings, and can also be used for water supply and drainage in factories and mines. The flow range of conveying liquid is 4.9ˇ«200m3/h, the range of lift is 22ˇ«239m, the range of matching power is 1.5ˇ«160KW, and the range of diameter is ¦Ő40ˇ«¦Ő150mm.
Details -
D/DG boiler feed water multistage Medicators
D-type boiler feed water multistage Medicators has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. For conveying clean water or other liquids with physical and chemical properties similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump flow parts, the sealing form and increasing the cooling system.
Details -
QJ deep well multistage submersible pump
QJ deep well multistage submersible pump is a high-performance wear-resistant electric pump produced. Select high-quality stainless steel shell, shaft core, coupling, water inlet and pump head (or copper alloy water inlet and pump head), high-strength and wear-resistant new composite polymer impeller and stainless steel guide shell, new floating type The structural impeller has no axial pressure on the motor during operation.
Details